SelectSeal Plus Concrete Sealer

Concrete Floor Sealer

SCOFIELD SelectSeal Plus Concrete Sealer is a clear concrete sealer with high-solid content, low-odor, self-crosslinking, urethane fortified acrylic, and it's designed to protect interior colored or uncured concrete. Selectseal Plus concrete sealer utilizes unique waterborne proprietary technology that provides superior wet slip resistance while forming a tough stain and abrasion-resistant gloss finish that is superior to most solvent-based sealers.

SCOFIELD SelectSeal Plus concrete sealer can be applied by traditional, foam, microfiber, or lamb’s wool applicators, as well as by conventional air-assisted airless or HVLP spray equipment. It can be applied over a wide range of temperatures and humidity conditions without cracking, ceasing, frosting, or gumming. It may be used to create floors compliant with various ANSI, ASTM, NFSI, and UL traction standards.

Features & Benefits:

• High-solids, low odor water-based formulation.
• Enhances concrete and chemical stain colors.
• Self-Crosslinking resin system delivers superior stain, abrasion, and chemical resistance.
• Exterior durable and UV light stable.
• Apply by brush, roller, or spray.
• Can be thinned for use as a clear primer.
• Will not gum or spider-web in hot conditions.

Sika Scofield's Concrete Sealers protect the surface, enhance the appearance of colored concrete, and may provide protection against contamination and chemical attack by imparting a film-forming layer on the surface of the concrete. This protective layer also adds a measure of abrasion resistance to the concrete surface.

Usage: Ideal for food courts, pools, entry, and walkways, Seals in the color of antiquing stamp releases and stains, Abrasion-resistant topcoat over stains, and dyes, As a concrete curing compound to reduce spider cracking and efflorescence, Prevents dusting of new or aging concrete

Coverage Rates: Coverage will depend upon thinning, method of application, surface porosity, and the texture of the substrate. Full strength prime-coat coverage on flat finished concrete is typically 300–400 sq ft./gal (7.4–9.8 m2/L) and will yield a dry film thickness of 1.3–1.1 mils. Thinned with 1 pint of water per gallon, prime coat coverage is typically 450 s ft./gal and will yield a dry film thickness of 0.85 mils. Porous, broom or textured finishes will require more sealer. As a topcoat or for second coat application, coverage of 600–800 ft2/gal (14.8–19.6 m2/L) is typical.