Densifiers for Concrete - Formula One Lithium Concrete Densifier

Lithium Concrete Densifier

SCOFIELD Formula One Lithium Concrete Densifier MP gives you a more cost-effective way to provide longer life to the colored architectural ground and polished concrete floors in schools, hospitals, government buildings, retail stores, shopping centers, and restaurants. It contains the optimal solids content required to deliver the best penetration and reactivity: a higher-solids-content formulation that is designed to be diluted 1:1 with potable water.

This concentrated formula means you get TWICE the usable densifier in every container of SCOFIELD Formula One Lithium Concrete Densifier MP. For softer or more porous concrete SCOFIELD Formula One Lithium Concrete Densifier MP can be used full strength.

Features & Benefits

• Low odor, non-yellowing water-based formulation.
• Breathable non-film forming surface treatment.
• Bonds directly to cement and aggregate silicates.
• Effectively locks in concrete dyes.
• Hardens and improves stain and scratch resistance.
• Deeply penetrates, and quickly reacts.
• Shortens concrete polishing times.
• UV light stable and weather-resistant

SCOFIELD Formula One Lithium Concrete Densifier MP is typically used for all concrete floor applications that are assigned an architectural value. It reacts well with the concrete surface, reducing porosity and dusting, improving abrasion resistance and overall long-term durability. SCOFIELD Formula One Lithium Concrete Densifier MP contains no VOCs.

Applications: Use SCOFIELD Formula One Lithium Concrete Densifier MP as an effective dye-lock when polishing concrete, or to harden, densify, or dustproof the cementitious surfaces of Interior or Exterior Floors, Stairs and Walkways, Terrazzo Floors, Ground and Polished Concrete Floors, Retail Floors, Concrete Countertops, Schools/ Institutions, Below Grade Basements, Commercial Concrete Floors, and Restaurants.

APPEARANCE/ COLOR: Clear colorless liquid.

SHELF LIFE: 2 years from the date of manufacture. 1 month after opening.

STORAGE CONDITIONS: Store in original containers at 40°F to 120°F (4°C - 49°C). DO NOT FREEZE!

COVERAGE RATES: Coverage will depend upon the method of application, surface porosity, age, moisture, absorption characteristics, and the texture of the concrete. Coverage on flat finished concrete is typically 200–400 ft2/gal (4.9–9.8m2/L). Old or soft concrete will require more material. Slabs ground to expose hard non-absorptive aggregates will take less material.

APPLICATION INSTRUCTIONS: If using spray equipment, always wear a protective respirator. Mask adjacent areas to protect property from splashes and overspray. Dried material will be difficult to remove. Remove overspray immediately with soap and water. SCOFIELD® Formula One Lithium Densifier MP can be used full strength or diluted to meet the needs of the specific project. Dilution rate, surface age, hardness, porosity, substrate moisture content, and purpose will determine the optimum combination of dilution and coverage rate. First-time applicators are encouraged to use the product diluted 1:1 with water.

Although the successful application can be performed with topical applications, the use of brooms, sponges, or mops to work the material into substrate pores has proven to produce superior results. For all uses and applications, spread or scrub puddles of excess material into surfaces before it is allowed to dry. Puddled material allowed to dry can form unsightly salts that are difficult to remove. All concrete must be at least 7 days old so that the initial concrete cure is complete. A 28-day cure so that the slab is fully dry and absorbent is preferred.

• Technical Data Sheet
• Safety Data Sheet