Polyaspartic Top Coat - Rockhard KRYSTAL KLEAR Kit

Protective Top Coating Floor Kit

Rockhard KRYSTAL KLEAR protective top coating is a two-component, non-slip, and solvent-based urethane floor coating system. This material has excellent surface adhesion properties on hard substrates like concrete, glass, porcelain, marble, ceramic, mosaic tiles, granite, natural stone, wood, aluminum, screed, galvanized sheet, etc. Rockhard Krystal Klear is engineered to produce high gloss or matte finishes that are long-lasting, tough, and able to withstand harsh weather, chemical exposure, and wet working areas.

Features:

• UV resistance for exterior uses and high-traffic environments.
• It provides nonslip finishes, even if the surface gets wet.
• Dustproofing benefits on absorbent surfaces.
• Easy to apply and simple floor maintenance.

Rockhard KRYSTAL KLEAR top coating does not get yellow, fade, or peel off in time. Commonly referred to as the best-engineered surface solution to insulation issues that may arise through a substrate like balconies, terraces, and bathrooms. This formulation will not damage the existing coating and produces a clear, transparent finish that is highly resistant to atmospheric conditions. Also known to be used for waterproofing and decorative resurfacing purposes.

APPLICATIONS:
concrete, wood, steel, aircraft hangar floors, UV-stable topcoat, marine protection for fiberglass, low-temperature equipment conditions, maintenance facilities, offshore platforms, industrial shop floors, car wash floors/wash bays, secondary containment, bridges, cooling towers, and wastewater treatment facilities.

SPECIFICATIONS:
Density A comp. (25°C, g/mL): 0,90 ± 0,10
Density B comp. (25°C, g/mL): 0,95 ± 0,10
pH (25°C): Not applicable (N/A)
Viscosity B comp. (25°C, mPa.s): 0 - 500
Solid content B comp. (% Weight): Not applicable (N/A)
Water transmission rate (kg/ m2. h0,5) : < 0,1

CLASS W3:
Adhesion strength by pull-off test (N/mm2): A rigid system without trafficking ≥ 1.0 N/mm²
Permeability to water vapor (m): 5 ≤ SD ≤ 50

CLASS II:
Pot life (23°C) : 50 – 60 minutes
Solvent: Organic solvent
Size: 1.4 Gal
Material: Urethane

• Tech Data Sheet
• Safety Data Sheet