PG-7K Polishable Grout

Polishable Grout Coating System

Ameripolish PG-7K polishable grout coating system is a fast-setting, modified polymer, high-strength cement with outstanding bonding properties & characteristics formulated specifically to fill in small cracks, pinholes, and surface irregularities in concrete floors. It also increases durability, gloss, and distinctness of image (DOI) on most floors.

PG-7K polishable grout coating system readily accepts Ameripolish concrete dyes and requires no special polishing procedures. Ameripolish PG-7K Part A - Powder must be mixed with PG-&K Part B - Liquid.

Features & Benefits:

• Fast,-setting, high-strength cement that fills in small
• cracks, pinholes, and surface irregularities
• Increases durability, gloss and distinction (DOI) on most cementitious floors
• Concrete gray color blends in with surrounding concrete
• Readily accepts Ameripolish concrete dyes
• Easy to use 2:1 mix ratio
• Buttermilk consistency for fast and easy troweling

PG-7K polishable grout coating system readily accepts Ameripolish concrete dyes and requires no special polishing procedures. Ameripolish PG-7K Part A - Powder must be mixed with PG-&K Part B - Liquid. Ameripolish PG-7K polishable grout coating system is ideal to be used on Concrete floors with pitting, holes, cracks, or surface irregularities.

Available in a 20 lb. Grout Powder & 1 gal Acrylic Kit

Mix 2 parts PG-7K Part A – Powder to 1 part Part B – Liquid at 10 lbs to every gallon of Part B. Use drill and egg beater or spiral mixer to mix. Add approximately half the liquid to the powder and mix until creamy and lump free. Add remaining liquid and mix until uniform. Properly mixed product should have the consistency of “buttermilk” or “light cream”.

Ameripolish PG-7K polishable grout coating system coverage varies considerably from floor to floor. PG-7K polishable grout coating system will typically cover 2,500 sq ft

• Safety Data Sheet