ColorSolve for Concrete Stains

Solvent Carrier for Concrete Dyes

Ameripolish ColorSolve is a solvent carrier designed and recommended for use with Ameripolish Classic and SureLock concrete dyes. ColorSolve solvent carrier for concrete dyes is extremely easy to use and leaves little to no residual dye on the surface. The use of ColorSolve solvent carrier for concrete dyes extends the dye coverage rate, increasing it up to 1,000 square feet per gallon!

Features & Benefits:

• Leaves no or very little residual dye on the surface saving time on cleaning and dye expense.
• Doubles the coverage rate of concrete dyes.
• A lower evaporation rate allows the use of an Ameripolish microfiber mop, saving time on taping and masking.
• Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing.

Ameripolish ColorSolve should be applied by using an appropriate solvent sprayer with or without a microfiber mop. Due to the lower evaporation rate of ColorSolve, using an Ameripolish microfiber mop reduces labor costs, saves time, and extends the square footage of your dye.

The use of ColorSolve does not require taping and masking areas in preparation for the dye treatment. Another unique feature of ColorSolve is that it allows concrete dyes to be applied at higher grit levels such as at 800 and 1,500 grit for color enhancement or reapplication and refurbishing.

Mix 1 gal concentrate bottle of Ameripolish Classic or SureLock concrete dyes with 1 gal RTU (3.8 L) of Ameripolish ColorSolve.
Mix 5 gal concentrate bottle of Ameripolish Classic or SureLock concrete dye with 5 gal RTU (18.9 L) of Ameripolish®ColorSolve.
Once Ameripolish ColorSolve is mixed properly with Ameripolish Classic or SureLock concrete dye, (Classic powder dye must be mixed for 2 hours before use) the mixture is then applied using an appropriate solvent sprayer with or without a microfiber mop.

• Technical Data Sheet
• Safety Data Sheet